Ethernet Tester with Optical & Electrical Ports – Amuse Tech Solutions
Discover the Ethernet tester with RFC2544 testing, optical/electrical ports, PING support, and a wide measurement range for accurate network analysis.
Description
Features
- Dual-port IPRAN/OTN
- Simultaneous Testing
- DATACOM Data Test
- 35/V.24 Test
- Independent Optical Power
- Optical Power Test
 Technical Specifications
| Power Measurement Range | -70dBm to +6dBm |
| Uncertainty | ±0.25dB |
| Linearity | 0.03dB |
| Display Resolution | 0.01dB |
| Measurement Wavelength | 1550 nm ±10 nm |
| Dynamic Range | 20dB |
| Measurement Range | 500M/1KM/2.5KM/5KM/10KM/20KM/40KM |
| Pulse Width | 10NS/25NS/50NS/100NS/250NS/500NS/1µS/2.5µS/5µS/10µS |
| Internal Battery | Polymer lithium battery 12000 mAh, 3.7 V |
| Electrical Port | 10/100/1000M adaptive |
| Optical Port | 1000M/100M/10G, configurable |
| Ethernet Link Self-Loop IP PING | Supported |
| Fixed Speed PING | 1, 10, 100, 200, 500 frames/second |
| RFC2544 Test Frame Length | Supports standard (64, 128, 256, 512, 1024, 1518 bytes) and JAMBO frames (4000, 8000, 10000 bytes) |
| RFC2544 Performance Metrics | Packet loss rate, throughput, latency, back-to-back for standard and JAMBO frames up to 10000 bytes |
| RFC2544 Protocol | Supports UDP and ICMP protocols |
| Port Positioning | Flash port indicator for network cable connected to the instrument, unaffected other ports |
| Route Tracking | PING remote IP device to display the IP list of all routers on the path |
| Interfaces | Two independent Ethernet interfaces, configurable as optical or electrical ports |
Reviews
There are no reviews yet.