Portable Low Voltage Pulse Generator for Cable Fault Testing – Amuse Tech Solutions
The low voltage pulse generator is a tie-rod portable integrated device, which is mainly used for shock discharge during low-voltage cable fault testing.
Description
Overview
The low voltage pulse generator is a tie-rod portable integrated device, which is mainly used for shock discharge during low-voltage cable fault testing. The pulse generator adopts humanized design operation mode, high-precision dedicated high-voltage electronic components and high-frequency high-voltage technology, which is easy to operate, light in weight and easy to carry.
It integrates the energy storage capacitor, DC high voltage source, and discharge ball gap. The operation of this equipment is safe and reliable, with automatic protection functions of over-current, overvoltage and overheating, it can truly achieve the effect of not being damaged by impact, and it can also work normally with high voltage to ground.
The Low voltage pulse generator is equipped with a time relay, and the discharge time interval can be arbitrarily set within 0-100 seconds. When working, the high-voltage pulse output is uniform and controllable, high-voltage side voltage measurement, make the result real-time and accurate. Unique high-voltage measurement design, in the stop state, the voltmeter can indicate the capacitor voltage in real time. The user can observe the residual voltage while discharging, until the voltage value returns to zero, and finally make the discharge more thorough.
Technical Specifications
| Impact high voltage | 0～12kV |
| High voltage partial pressure | 2.5 level |
| Built-in capacitor | 12μF |
| Discharge power | 0-864J |
| Output voltage polarity | negative polarity |
| Impact power | 250W@peak |
| Working mode | Selectable or adjustable impulse rate and Single shot |
| Length of test cable | The high-voltage output line of the pull-rod type high-voltage pulse generator is 2 meters long, the ground line is 3 meters long, and the power line is 1.8 meters long. |
| Minimum Output current in DC mode | 30mA at 12kV |
| Over temperature protection | 65℃ |
| Over current protection | 8mA (more than 3 seconds) |
| Volume(mm) | 540L×300W×450H |
| Weight | not more than 25kg |
| Power supply | AC220V±15%, 50Hz±2Hz(60Hz) |
| Ambient temperature | -20 to +60℃ |
