Amuse Tech Solutions Gigabit Ethernet 16 E1 To GE PDH Multiplexed Fiber Optic Transmission
Amuse Tech Solutions Gigabit Ethernet 16 E1 To GE PDH Multiplexed Fiber Optic Transmission is a compact size, PTP and PTMP transmission equipment that easily bring the E1 and Ethernet services to customer premises or remote end office.
Description
Overview
Amuse Tech Solutions Gigabit Ethernet 16 E1 To GE PDH Multiplexed Fiber Optic Transmission is a compact size, PTP and PTMP transmission equipment that easily bring the E1 and Ethernet services to customer premises or remote end office. It operates at 1.25 Gbps transmission rate over the optical cable, with enough bandwidth to carry 16 x E1s, as well as 4 x 10 or 100 or 1000 M switching Ethernet data. These four Ethernet ports could be 4 electrical GE interfaces or 3 x electrical GE interfaces plus 1 x SFP gigabit optical ETH interface. It is designed with 2 interface slots on the rear panel to adapt different E1 card modules, so it can carry from 4 x E1 up to 16 x E1 due to customer requirement.
Features
- Compact 1 U height, 19″ rack mountable casing for the last mile access
- 1.25 Gbps transmission rate over the fiber optic, guaranty bandwidth for different data traffic
- Optical network interface supports 1 + 1 auto protection, or individual for 2 directions
- 2 interface slots for E1 card module; 4E1 and 8E1 card module is provided
- Â Provides maximum 16 x E1 interfaces, and 4 switching Ethernet ports
- 4 x 1000 Base-T or 3 x 1000 Base-T plus 1 x 1000 Base-FX SFP/LC, defined by DIP switch
- Ethernet interface supports VLAN and spanning tree for broadcast storm protection
- Additional RS232 user port for slow speed data transport
- Order wire port is provided for voice communication
- Support firmware and software remote upgrade
- NMS provides alarm, performance, and monitor local or remote equipment status
- AC 220 V and DC -48 V dual power supply is orderable
Technical Specification
| Bit rate | 2.048 Mbps ± 50 ppm |
| Code type | HDB3 code, G.703 standard |
| Input impedance | 75 W or 120 W |
| Frame structure | G.704, G.706 |
| Jitter | G.742, G.823 |
| Bit rate | 1.25 Gbps ± 50 ppm |
| Output optical power | ≥ -15 dBm |
| Receiving sensitivity | ≤ -35 dBm |
| Optical wavelength | 1310 nm or 1550 nm |
| Optical interface connecter | SC or FC |
| Optical wavelength | 1310 nm or 1550 nm |
| Optical interface connecter | SFP or LC |
| Bit rate | 10 or 100 Mbps, half or full duplex auto |
| Standard | IEEE 802.3, IEEE 802.1Q (VLAN) |
| Connector | RJ45 |
| Telephone set | standard 2-line telephone |
| Bandwidth | 64 Kbps |
| Input voltage | -48 V DC or 220 V AC |
| Voltage range | -36 V DC to -72 V DC, 176 V AC to 264 V AC |
| Power consumption | < 50 W |
| Working temperature | 14 °F to 122 °F (-10 °C to 50 °C) |
| Working humidity | 5 % to 95 % (non-condensed) |
| Storage temperature | -40 °F to 176 °F (-40 °C to +80 °C) |
| Dimension | 17.3 in x 8.6 in x 1.73 in (440 mm x 220 mm x 44 mm) |
| Net weight | 8.8 lb (4 Kg) |
Reviews
There are no reviews yet.